Home Business Verticals Petrochemicals G-Lene

G-Lene

Overview & Features

G-lene is the brand name of HDPE and LLDPE resins produced from the swing plants (HDPE/LLDPE) of GAIL (India) Ltd. These resin grades are manufactured using “Sclairtech” solution process technology of M/s Nova Chemicals, Canada and gas phase Unipol PE Process of M/s Univation Technology, USA. With the introduction of M/s Univation technology, GAIL now offers wide range of LLDPE and HDPE grades with varying melt indices and densities for wide variety of moderate to high end applications.

Plex-banner-15.05.2019

G-Lene HDPE Resin Grades

G-lene HDPE resin grades provide excellent processability, high gloss, low degree of warpage, high impact strength and good stiffness. These grades offer greater ability to meet the diverse and innovative requirements of the market with exceptionally high quality performance in both extrusion and molding applications.

G-Lene LLDPE Resin Grades

G-lene LLDPE resin grades offer excellent processability with an optimal mix of optical and mechanical properties for various applications. These grades offer great ability to meet the diverse and innovative requirement of the demanding market with exceptionally high quality performance in extrusion and moulding applications.

Raffia & Monofilament Grades

W50A009 has excellent processability with an optimum balance of tape strength and elongation. It provides excellent orientation characteristics with low water carry over. Its application includes woven sacks for Fertilizer Industry, Food Grain Packaging, Sugar, Chemicals and Industrial Pkg. It is well accepted by the leading processors for high strength (tenacity) stretched tape application.

T50A010 offers an optimum balance of moderate strength and high elongation which makes it an ideal choice for low denier application like tarpaulin, woven sacks for industrial use and wrapping fabric. It also has excellent processability for low denier yarn application in mosquito and fishing nets.

Y50A010U offers an optimum balance of strength and elongation which makes it suitable for low denier monofilament applications like Fishing and Mosquito Net. It is also suitable for low denier stretched tape applications like Tarpaulin etc.

Blow Molding Grade

B53A003U is recommended for small size containers up to 5L for foodstuffs (edible oil, ghee etc.), industrial chemicals (detergents, pesticides, paints, solvents etc.), lube oil, toiletries & cosmetics. It offers an optimum combination of toughness, stress cracking resistance and processability.

Pipe Grade

P46A010U has excellent processability. It is recommended for pipe application like potable water, sprinkler irrigation, sewerage, cable duct etc. meeting the hydrostatic strength requirements for PE-63 material.

Injection Moulding Grades

I60A080/ I62A080U has excellent processability with optimum balance of mechanical properties, dimensional stability and gloss. It is used for general purpose crates etc.

I60U080/ I62U080U is duly stabilized with UV stabilizer for long service life under outdoor exposure. It combines superior processability with optimum balance of mechanical properties and low degree of warpage. It is widely used in soft drink crates, milk crates, fishing crates, helmets etc.

I50A180/ I56A200U has excellent processability with low degree of warpage and good mechanical properties. It is especially suitable for household items like Buckets, Mug, Toys etc.
I50A250 is another Injection Moulding grade with higher flow rate for excellent processability with high gloss and low cycle time. It is widely used for medium to large size household items.

Film Grade

E45A003 has excellent processability with moderate stiffness. It is widely used in blend with LD/LLDPE in blown film extrusion for producing co-extruded laminated/non-laminated films for various packaging applications

Film Grades

F20S009/ F18S010U has excellent processability with optimum balance of mechanical and optical properties. It has adequate level of slip and antiblocking agent for good openability and slip characteristics of the film. Its low gel count, resistance to leakage & pinholes, excellent sealing characteristics make it preferred choice for consumers in Industrial/ consumer packaging for various applications. It is widely used for co-extruded laminated/ non-laminated film for various film applications. It can also be used in drip laterals.

E20AN009/ F18A010U has excellent processability with optimum balance of mechanical and optical properties. It is without slip and antiblocking agent additive. It is widely used for lamination and cling film applications.

F18S020U has excellent processability and optical properties and is used for liners, industrial packaging and other general purpose film applications.

F18A020U is without slip and antiblocking agent additive and is especially used for cast stretch film.

Metallocene Film Grades

MF18S010U offers outstanding tensile, impact and puncture strength with very good sealing properties. It is recommended for use in multilayer film for various applications like freezer bag, laminated films/non laminated films for food/non-food packaging etc.

MF18A010U is without slip and antiblocking agent additive and is especially used for lamination film, cling film etc.

Rotomoulding Grades

R35A042/ R36A050U has excellent processability with good mechanical properties. It is widely used in chemical tanks, water storage tanks, loft tanks, pallets etc.

R35U042/ R36U050U is duly stabilized with UV stabilizer for long service life under outdoor exposure for colored products. It provides excellent processability with optimum combination of impact toughness and ESCR. It is widely used for manufacturing water storage tanks for domestic and industrial purpose, bins, road dividers, playground equipment, toys, boats etc.

Coating/Lamination Grade

E36A060 is characterized by excellent processability and superior coating properties on various substrates. It is generally used in blending with LDPE for extrusion coating on HDPE woven fabric for various packaging applications. It can also be used in extrusion coating on aluminum foil, paper, jute etc.

Injection Moulding and Masterbatch Grade

I26A500U has excellent gloss and high flow. It is used in caps, closures and also, as a base resin for manufacturing masterbatches.

Drip Pipe Grade

D22S010is recommended for drip irrigation extruded products. This grade meets the requirements of material as per IS 12786:1989. The pipe made from this grade meets hydrostatic characteristics (creep rupture stress requirement) for PE-25 material when incorporated with adequate quantity of carbon black as specified in clause 4.1 of IS 12786:1989. The material conforms to natural resin designation IS 7328-2B-NB-BXDA of IS 7328:2020.

G-Lex

G-Lene

Consignment Stockists

Zonal Offices

Also in this Section